The 2013 Honda Accord HFP (Honda Factory Performance) suspension is a dealer-installed upgrade that sharpens handling without compromising daily comfort. Enthusiasts searching for the exact 2013 Accord HFP suspension part number often need to know which kit fits their specific model—sedan or coupe—and where to source the components now that the kit is discontinued. This article outlines the official part numbers, what the kit includes, and how to obtain it.
Shop on Amazon
Browse the latest options and prices.
ASAPE 12 Pcs Suspension Kit - Fit 2013-2017 for Honda Accord(Auto Trans), Include - Front Left and R
What Is the HFP Suspension?
HFP stands for Honda Factory Performance, a line of accessories designed to enhance performance while maintaining OEM reliability. The HFP suspension package for the 9th-generation Accord (2013–2017) includes matched dampers and springs that lower the vehicle approximately 15 mm (0.6 inches). The result is reduced body roll, improved steering response, and a more planted feel on winding roads, yet the ride remains compliant enough for daily use. The kit was available as a standalone option from Honda dealers and is sometimes found as a take-off from HFP-equipped vehicles.
2013 Accord HFP Suspension Part Numbers
Honda produced two distinct HFP suspension kits for the 2013 Accord: one for the sedan and another for the coupe. Each kit includes four pre-assembled damper-and-spring units, plus new bump stops and dust boots. The part numbers are:
- Sedan: 08W92-T2A-100B
- Coupe: 08W92-T2A-100A
These full-kit numbers are the most direct way to purchase the complete HFP suspension. Note that these kits are specific to the 2013 model year; later model years (2014–2017) use different part numbers, so verify compatibility if you own a 2013 Accord.
Individual Component Parts
If you only need to replace a damaged damper or spring, individual components from the HFP kit are also available, though some parts may be discontinued. The front damper part number for the sedan is 51605-T2A-A12 (left) and 51606-T2A-A12 (right). For the coupe, front damper numbers are 51605-T2A-A13 (left) and 51606-T2A-A13 (right). Rear dampers share the same number across both body styles: 52605-T2A-A02. Springs are color-coded and sold only as part of the full kit, not individually.
Why Upgrade to HFP Instead of Aftermarket?
Choosing the HFP suspension over generic coilovers or lowering springs has three main advantages:
- OEM Integration – HFP parts are engineered and tested by Honda, ensuring they work seamlessly with the factory chassis, electronics, and safety systems. No error codes or odd ride heights.
- Ride Quality Balance – Aftermarket suspensions often prioritize stiffness or low cost at the expense of comfort. HFP offers a sporty but livable ride, similar to the factory sport-tuned models.
- Resale Value – An HFP-equipped Accord can be more appealing to buyers who value genuine performance upgrades.
How to Verify Compatibility
Before purchasing, confirm your Accord’s exact trim and body style. The kit fits all 2013 Accord trims (LX, EX, EX-L, Touring) but note that coupe and sedan kits are not interchangeable. Also check for any existing modifications: if your car has aftermarket wheels or a different spring rate, the HFP geometry may need adjustments. For the most accurate fitment, refer to your VIN with a Honda parts department.
Where to Find HFP Suspension Parts
Since Honda discontinued the HFP suspension in 2018, new old stock (NOS) is becoming scarce. Try these sources:
- Local Honda Dealership Parts Departments – Some dealers still have NOS kits in their inventory. Call multiple dealers and ask them to search nationwide.
- Online OEM Parts Retailers – Websites like Honda Automotive Parts or Majestic Honda list discontinued parts. Use the part numbers above to search stock.
- Used Market – Search for “HFP take-off suspension” on enthusiast forums (e.g., DriveAccord) or local marketplaces. Used sets from low-mileage Accords can be a cost-effective alternative if you request photos and inspect for damage.
Avoid generic “HFP-style” parts sold without the authentic Honda part number—they might not match the HFP dampers or spring rates.
Installation Considerations
Installation is straightforward if you have basic mechanical skills, but because the dampers are pre-assembled with springs, you’ll need a spring compressor to mount the assembly. The job typically takes 3–5 hours on jack stands. After installation, a wheel alignment is mandatory to prevent uneven tire wear. Some owners also install a HFP front sway bar (part number 08W92-T2A-110) for even sharper turn-in, though it’s not required.
If you plan to install the kit yourself, have these tools ready: floor jack, jack stands, spring compressor, socket set, torque wrench, and anti-seize compound for the damper mounting bolts.
Final Recommendation
For owners seeking a genuine OEM handling upgrade for the 2013 Accord, the HFP suspension kit is the gold standard. The correct part number is 08W92-T2A-100B for sedan and 08W92-T2A-100A for coupe. Start by contacting several Honda dealers for new-old-stock availability. If new kits are impossible to find, a used set with under 30,000 miles is a reasonable second option—just inspect the dampers for leaks before purchase. Pair the suspension with quality tires like the Michelin Pilot Sport 4S to fully realize its potential. With the HFP suspension installed, your 2013 Accord will handle like a modern sport sedan without sacrificing everyday comfort.