Porsche 911 Bilstein Jack Part Number: What You Need to Know

If you own a Porsche 911 and are searching for the correct "Bilstein jack part number," you likely need a jack pad that fits the car's unique lift points. Bilstein, known for premium suspension components, also produces a jack pad specifically designed for Porsche 911 models. This pad protects the rocker panel pinch welds and provides a safe, stable lifting surface. Using the wrong pad or no pad at all can lead to costly body damage. This guide explains what the Bilstein jack pad is, why the part number matters, and how to choose the right one for your 911.

What Is the Bilstein Jack Pad?

The Bilstein jack pad is a rubber or polyurethane adapter that fits into the reinforced jacking points on a Porsche 911. These jacking points are located along the rocker panels and are designed to accept a specific shape. The pad sits on top of a standard floor jack saddle, allowing you to lift the car without crushing or bending the pinch weld. The most common part number you'll encounter is 24-242709. This pad is compatible with a wide range of 911 models, but there are nuances.

Why the Correct Part Number Matters

Porsche 911 generations have different jack point designs. For example:

• 964 and 993 (1989–1998) have narrower, rectangular slots.
• 996 and 997 (1998–2012) use a similar but slightly wider slot.
• 991 and 992 (2012–present) have a more substantial, deeper pocket.

Using the wrong pad can:

• Not seat correctly, causing the car to slip.
• Damage the paint or rocker panel cover.
• Prevent the jack from reaching high enough.

Bilstein’s 24-242709 pad is designed to work with multiple generations, but it is optimized for 996, 997, 991, and 992 models. For earlier 911s (964/993), you may need a different pad or an adapter plate.

Common Part Numbers and Compatibility

• Bilstein 24-242709: Fits most 911 models from 1998 onward (996, 997, 991, 992). Also works on some Boxster and Cayman models.
• Bilstein 24-242708: Similar but with a different profile—less common, generally for older models.
• OEM Porsche part numbers: 992 721 921 00, 955 721 921 00 (these are Porsche-branded pads, not Bilstein, but often used interchangeably).

Always verify fitment with your specific model year and body style (coupe, cabriolet, or targa).

How to Find the Exact Part for Your 911

The safest way to confirm the correct part is to:

1. Check your owner’s manual – It may specify the recommended jack pad.
2. Use an online VIN decoder – Enter your VIN on a Porsche parts site to see genuine part numbers.
3. Measure your jack point – The slot width and depth vary. The 24-242709 pad measures about 1.5 inches wide and 2 inches deep.
4. Contact a Porsche dealer – Provide your VIN and ask for the recommended Bilstein or OEM pad.

If you own a 964 or 993, note that the Bilstein 24-242709 may not fit snugly. For those models, consider a dedicated 964/993 pad from another manufacturer or the OEM adapter.

Using the Bilstein Jack Pad Safely

Once you have the correct pad, follow these steps:

1. Position your floor jack under the designated jack point (front or rear, as indicated in your manual).
2. Place the Bilstein pad onto the jack saddle. Ensure it is centered.
3. Raise the jack until the pad just contacts the jacking point. Confirm it is fully seated into the slot.
4. Continue lifting smoothly. The car should lift without any rocking or slipping.
5. Always use jack stands after lifting – never rely solely on the jack.

The pad's rubber material grips the jack point and prevents metal-on-metal contact. It also distributes weight to avoid bending the pinch weld.

Alternatives and Compatibility

If you cannot find the Bilstein pad, several other brands offer similar designs:

• Rennline – Precision machined aluminum with replaceable urethane inserts.
• ESG – Rubber pads that fit many Porsches.
• OEM Porsche – The genuine factory pad (often made by Bilstein or another supplier).

Bilstein pads are widely available from Porsche parts specialists and tool suppliers. They strike a balance between cost and durability. Expect to pay between $30 and $60.

Final Recommendation

For most Porsche 911 owners with a 1998 or newer model, the Bilstein 24-242709 jack pad is the ideal choice. It is affordable, reliable, and engineered to match the factory lift points. If you own an older 911 (964 or 993), look for a pad specifically designed for those generations, or use a universal adapter with caution. Always confirm compatibility before purchasing. A small investment in the right jack pad will protect your 911’s body and make routine maintenance safer and easier.