Porsche 991 Front Sport Spoiler Lip Part Number: Complete Guide

If you own a Porsche 991 (2011–2019) and want to upgrade or replace the front spoiler lip, knowing the exact part number is essential. The front sport spoiler lip—often called the front lip spoiler or lower front bumper trim—varies by model year, body style, and optional equipment. This guide covers the official Porsche part numbers for the 991 front sport spoiler lip, explains how to identify which one fits your car, and offers practical advice for purchasing the right piece.

Understanding the 991 Front Sport Spoiler Lip

The front spoiler lip on a 991 is a separate trim piece attached to the lower portion of the front bumper. On models equipped with the Sport Design package or the Aerokit, the lip is more pronounced and sportier. The part number differs based on:

• Model year (991.1 vs 991.2)
• Body style (Carrera, Carrera S, Targa, Turbo, etc.)
• Exterior package (standard, Sport Design, Aerokit)
• Left-hand drive vs right-hand drive (though many are symmetrical)

For the standard bumper, the front spoiler lip is typically a single piece. For Sport Design or Aerokit bumpers, the lip may come as a separate assembly or include additional fins.

OEM Part Numbers for 991 Front Sport Spoiler Lip

Below are the factory Porsche part numbers for the front spoiler lip across popular 991 variants. Note that these numbers apply to left-hand drive (LHD) models unless stated. Always verify with your VIN or dealer before ordering.

991.1 (2012–2016) Front Spoiler Lip Part Numbers

• Standard Carrera / Carrera S (without Sport Design): 991-505-519-00 (primed, needs paint)
• Carrera / Carrera S with Sport Design package: 991-505-653-00 (primed)
• Carrera 4 / 4S with Sport Design: 991-505-653-01 (primed, AWD models differ slightly)
• Turbo / Turbo S: 991-505-654-00 (unique to Turbo bumper)
• Targa 4 / 4S (standard spoiler): 991-505-519-01
• GT3 (991.1): The front lip is integrated into the bumper, but the lower splitter is part number 991-805-959-00

991.2 (2017–2019) Front Spoiler Lip Part Numbers

• Standard Carrera / Carrera S: 991-505-765-00 (primed)
• Carrera / Carrera S with Sport Design: 991-505-767-00 (primed)
• Carrera 4 / 4S with Sport Design: 991-505-767-01
• Turbo / Turbo S: 991-505-768-00
• Targa 4 / 4S (standard): 991-505-765-01
• GT3 (991.2): The front splitter is part 991-805-959-01 (for cars with front axle lift) or 991-805-959-02 (without lift)
• GT3 RS: 991-805-960-00

Note: Part numbers ending in "-00" are typically for standard finish (primed for paint). Some may come in a specific color code if ordered as a replacement for your car's original color. For example, if your car is black, you might order a pre-painted lip with the correct color code. But most aftermarket replacements are sold primed to match your paint.

How to Confirm the Correct Part Number for Your Porsche 991

To avoid buying the wrong part, follow these steps:

1. Check your VIN: Use an online Porsche parts catalog (like the one available from Porsche's official website or a dealer) and enter your VIN. The system will show the exact part numbers for your car as built.
2. Identify your bumper style: Look at the front bumper. Does it have a central air intake with a splitter? The standard bumper has a wider lower grille, while Sport Design has more defined edges and a separate lip. The Aerokit has a lower spoiler that wraps around.
3. Look at existing part number: If the original lip is still on the car, remove it (usually held by screws and clips) and check the part number molded into the plastic. This is the surest method.
4. Consult Porsche dealer: Provide your VIN and ask for the correct part number. Dealers can also tell you if any supersessions apply (older numbers replaced by newer ones).

Where to Buy the Porsche 991 Front Spoiler Lip

Once you have the part number, you have several purchasing options. This guide does not recommend specific marketplaces, but here are general avenues:

• Porsche dealership parts counter: Most expensive but guarantees OEM fit and quality. You can order primed or pre-painted (with your paint code).
• Online Porsche parts specialists: Many independent shops sell genuine Porsche parts online. Often they offer lower prices than dealers. Look for authorized distributors.
• Used or take-off parts: Some owners remove the spoiler lip when upgrading to a different bumper. You can find used OEM lips in good condition, but inspect for cracks or damage.
• Aftermarket replicas: Not recommended because fitment can be poor, materials may be inferior, and they may not match the original part number. Stick with OEM for precise fit and durability.

When ordering, decide whether you want to paint it yourself or buy pre-painted. Pre-painted parts cost more but save time. Primed parts require preparation and painting by a body shop.

Installation Tips for the 991 Front Spoiler Lip

Replacing the front spoiler lip is a DIY-friendly task for those with basic automotive skills. The lip is attached with a combination of bolts, screws, and clips along the bottom edge of the bumper. Here's a general procedure:

• Tools needed: Torx bits (usually T20 or T25), flathead screwdriver (for clips), trim removal tool, jack or ramps if needed for access.
• Steps:
  1. Safely lift the front of the car and secure it on jack stands.
  2. Locate and remove any under-tray screws that cover the lip.
  3. Remove the screws/bolts holding the lip to the bumper (usually along the bottom edge and at the wheel arch liners).
  4. Carefully unclip the lip from the bumper. It may be attached with plastic retainers.
  5. Install the new lip by aligning the mounting points and reversing removal. Use new clips if old ones are brittle.
  6. Tighten all fasteners to spec (typically 1.5–3 Nm for small screws).

If you are not comfortable, a body shop or independent Porsche specialist can install it for about one to two hours of labor.

Common Questions About the 991 Front Spoiler Lip

Is the front spoiler lip removable from the bumper?

Yes, it is a separate part designed to be replaced if damaged or for aesthetic updates. The bumper cover itself rarely needs replacement unless it is structurally damaged.

Can I install a Sport Design lip on a standard bumper?

Not directly. The Sport Design lip has a different shape and mounting points compared to the standard bumper lip. You would need to replace the entire lower bumper section or the whole bumper cover. For most owners, it's simpler to stick with the lip designed for your existing bumper.

Does the GT3 lip fit a Carrera?

No. The GT3 bumper is unique, and its splitter is not interchangeable with the Carrera's. Even the mounting points differ.

What color should I order?

If you want an exact match, order a pre-painted lip using your Porsche paint code (found on the build sticker in the service book or driver's door jamb). If you plan to respray the lip yourself, order primed.

Final Recommendation

To get the right Porsche 991 front sport spoiler lip part number, start by looking up your VIN on a Porsche parts database or contacting your dealer. The most common numbers are 991-505-519-00 for 991.1 Carrera standard and 991-505-765-00 for 991.2 Carrera standard. If you have a Sport Design package, use the numbers listed above. Invest in a genuine OEM part to ensure perfect fit, durability, and paint adhesion. Aftermarket lips may save money upfront but often result in poor fitment and early fading or cracking. Plan for painting costs (if buying primed) and a couple of hours of installation time. With the correct part number, upgrading or replacing your 991's front spoiler lip becomes a straightforward project that enhances the car's appearance and can even improve aerodynamics at high speeds.