Porsche Cayenne Turbo Plastic Interior Part 5007: What It Is and How to Replace It

If you own a Porsche Cayenne Turbo and have noticed a loose, cracked, or missing plastic piece inside the cabin, part number 5007 might be what you need. This specific interior component is a common point of wear in these high-performance SUVs. Understanding what it is, where it goes, and how to replace it can save you time and money. This guide provides practical information for owners and DIY enthusiasts.

What Is Porsche Cayenne Turbo Interior Part 5007?

Part 5007 is a plastic trim piece used in the interior of the Porsche Cayenne Turbo, specifically for model years 2011 through 2018 (second generation, Type 958). It is a small, black plastic cover typically located on the center console, near the gear shifter or the touchpad controller. Its purpose is to conceal screws or wiring and provide a finished look. The part is often made of ABS plastic with a matte or textured finish to match the surrounding trim.

Common Names for Part 5007

Depending on the vendor or diagram, this part might be referred to as:

• Center console trim cover
• Shift bezel
• Controller surround
• Switch panel cover Always verify by the OEM part number 958-552-500-7 (or similar) to ensure exact fit.

Identifying the Part in Your Cayenne Turbo

Before ordering, you need to confirm that part 5007 matches the piece in your vehicle. Look for a plastic panel that is separate from the main console, often secured by clips. Typical locations include:

• Around the gear selector lever
• Adjacent to the touchpad or infotainment controller
• Near the cup holders Check for cracks, fading, or broken tabs. If the part is loose but not broken, it may just need to be snapped back in. For a missing piece, inspect the area for mounting points.

Visual Confirmation

Compare the shape of the part to online images from reputable Porsche parts dealers. Note that the Cayenne Turbo may have slightly different trim than the base model due to sportier accents, but part 5007 is generally the same across Turbo trims.

Common Issues with Part 5007

Over time, the plastic can become brittle from UV exposure or temperature changes. Common problems include:

• Broken clips that cause the cover to pop out
• Cracking around screw holes
• Worn or faded surface finish
• Accidental damage during interior repairs or upgrades These issues are cosmetic but can lead to rattling or an unfinished appearance. Replacing the part restores the interior to factory condition.

Replacement Options

You can source a new or used part 5007 from several channels. Avoid generic aftermarket parts unless they are from a trusted brand, as fit and finish are critical in a luxury vehicle.

OEM Genuine Porsche Part

Buying directly from a Porsche dealership or authorized parts distributor guarantees exact fit and material quality. Expect to pay a premium—typically between $30 and $80 depending on the specific variant.

Used or Salvaged Parts

Search for used parts from specialty Porsche recyclers. These are often in good condition at a lower cost (around $15–$30). Check for broken tabs or excessive wear before purchasing.

Aftermarket Replacements

Some third-party manufacturers produce replicas of plastic interior parts. While cheaper ($10–$20), they may not match the original texture or color perfectly. Read descriptions carefully and look for high ratings.

Compatibility Across Cayenne Models

Part 5007 is designed for the second-generation Cayenne (2011–2018), including the Turbo, Turbo S, and GTS variants. It may also fit the e-hybrid models from those years, but confirm by VIN or part number cross-reference. It is not compatible with first-generation (2003–2010) or third-generation (2019+) models.

Checking Your Vehicle Identification Number (VIN)

Use your VIN to verify compatibility. Many dealership websites offer a VIN check tool. Alternatively, call a Porsche parts counter with your VIN and ask for part number 958-552-500-7.

How to Replace Part 5007: A Basic Guide

Replacing this trim piece is straightforward and requires no special tools. However, proceed carefully to avoid damaging nearby panels.

Tools Needed

• Plastic trim removal tool (or flathead screwdriver wrapped in cloth)
• Clean microfiber cloth
• Optional: new retaining clips if the old ones are broken

Steps

1. Remove the broken cover: Gently pry up the edges using the trim tool. Start at a corner and work around. The cover is held by clips; pull straight up once they release.
2. Disconnect any wiring: If the cover has switches or lights, unplug the connectors by pressing the release tab.
3. Install the new cover: Align the clips with the receptacle holes and press down firmly until you hear a click. For covers with wiring, connect the plugs first.
4. Test fit: Ensure the cover sits flush and does not rock. If it moves, check that all clips are engaged.

Precautions

• Do not use excessive force; plastic can break.
• Work in a well-lit area to see clip locations.
• If the cover does not snap in, maybe you have the wrong part.

Cost and Considerations

Total cost for replacing part 5007 ranges from $10 (used aftermarket) to $80 (OEM new). Installation is free if you DIY. Labor at a shop would add $50–$100. Factor in shipping costs if ordering online. For a perfect match, OEM is recommended. If budget is tight, a used OEM part is a good compromise.

Final Recommendation

For most owners, the best option is to purchase a new OEM part 5007 from a Porsche dealer or reputable online parts store. This ensures longevity and a flawless appearance. If you are experienced with interior work and want to save money, a used OEM part in good condition is also viable. Aftermarket parts are acceptable only if you cannot find OEM and are willing to accept potential minor differences.

Inspect the area around the part for any other damage before ordering. Replacing part 5007 is a small but satisfying fix that keeps your Cayenne Turbo's interior looking premium.