If you've come across the part number 000-43-202-52 while browsing Porsche parts catalogs or looking up a specific component for your car, you're probably wondering what it is and whether it's the right piece for your repair or restoration. This article explains exactly what Porsche part 000-43-202-52 is, which vehicles it fits, and how to ensure you're getting the correct genuine part without unnecessary hassle.
What Is Porsche Part 000-43-202-52?
Porsche part number 000-43-202-52 is a genuine OEM lug bolt (sometimes called a wheel bolt) designed for Porsche vehicles. It is a factory replacement part that meets Porsche's exact specifications for thread size, length, head shape, and material strength. This part is specifically used to secure alloy wheels to the hub, and it plays a critical role in wheel safety.
Key Specifications
- Thread size: M14 x 1.5 (standard for many Porsche models)
- Length: Typically around 27-28 mm (ball seat type)
- Head: 17 mm hex, ball seat design (R14 ball radius)
- Material: High-strength steel with anti-corrosion coating
This bolt is not a lock bolt; it is a standard lug bolt used for most factory and aftermarket wheels that require a ball seat. The ball seat design ensures a self-centering fit that distributes clamping force evenly.
Which Porsche Models Use This Part?
Porsche part 000-43-202-52 is commonly used across a wide range of Porsche models, particularly those produced from the late 1990s through the 2010s. It is a direct replacement for original equipment bolts on many Boxster, Cayman, 911, and Cayenne models. However, always verify compatibility with your specific vehicle year and wheel type.
Model Compatibility
- Boxster (986, 987) – Most 17- and 18-inch factory wheels
- Cayman (987) – Same as Boxster
- 911 (996, 997) – Many standard wheel sets
- Cayenne (955, 957) – First-generation Cayenne models
- Panamera (970) – Some early models
Note that later models (991, 992 911; 981, 718 Boxster/Cayman; second-gen Cayenne, etc.) may use a different bolt length or thread pitch. The 000-43-202-52 is a common size, but it's essential to cross-reference with your car's VIN or wheel type.
Wheel Fitment Considerations
- Ball seat vs. conical seat: Porsche uses ball (radius) seat bolts. Using conical bolts on a ball seat wheel can cause loose wheels or damage.
- Length: Using bolts that are too long can damage brake components or suspension; too short may not provide enough thread engagement.
- Torque spec: Porsche recommends tightening to 130 Nm (96 ft-lb) for most M14 bolts.
How to Verify You Have the Correct Part
Before purchasing, confirm that 000-43-202-52 is the right part for your car. Here's how:
- Check your owner's manual or a parts catalog for the exact bolt specification.
- Remove one existing bolt and compare its length, thread pitch, and seat shape. A ball seat has a rounded end; a conical seat is tapered.
- Measure the bolt length from under the head to the tip. The 000-43-202-52 is approximately 27-28 mm.
- Use an online Porsche parts lookup tool (available on official Porsche dealers' sites) by entering your VIN. This will give you the exact part number.
If you have aftermarket wheels, the seat type may differ. Many aftermarket wheels use a conical seat, so the ball seat bolt will not work. In that case, you need bolts with a conical seat (often 60-degree taper).
Where to Purchase Genuine Porsche Parts
When buying genuine OEM parts, it's best to go through authorized Porsche dealers or reputable independent shops that stock authentic components. Avoid unbranded bolts or those sold without clear OEM markings, as inferior steel can cause wheel failure.
- Your local Porsche dealership: They can look up the part by VIN and ensure you get the correct bolt. Prices are often higher, but the part is guaranteed genuine.
- Authorized Porsche parts retailers: Many online sellers specialize in OEM Porsche parts and offer competitive pricing. Look for those that explicitly state "Genuine Porsche" in the description.
- Junkyards or used parts: Not recommended for safety-critical bolts, as fatigue or corrosion may be invisible.
Always buy a full set if you're replacing all bolts – mixing old and new can cause uneven torque.
Final Recommendation
Porsche part 000-43-202-52 is a standard, reliable wheel bolt that fits many Porsche models from the mid-1990s to early 2010s. If you're replacing missing or damaged bolts, stick with genuine OEM parts to ensure correct seating and strength. Before buying, confirm your vehicle's exact bolt length and seat type – especially if you have aftermarket wheels. Purchase from an authorized dealer or a trusted OEM parts supplier, and always torque the bolts to spec for safe driving.