If you’re searching for suspension part number b0cp6vg2t, you likely have a specific vehicle in need of repair or an upgrade. This article explains exactly what this part number refers to, which vehicles it fits, the critical specifications you should verify, and how to ensure you purchase the correct component. No fluff—just practical information to help you get the right part the first time.
What Is the Suspension Part Number b0cp6vg2t?
Part number b0cp6vg2t corresponds to a front lower control arm for several popular late-model vehicles. Lower control arms are a critical suspension component that connect the wheel hub to the vehicle’s frame, allowing vertical wheel movement while controlling lateral and longitudinal forces. This particular arm includes the ball joint and may come with bushings pre-installed.
The alphanumeric code is a manufacturer or supplier part number, not an OEM (Original Equipment Manufacturer) number. It is used by aftermarket brands to cross-reference with OEM parts. It is important to understand that while the number identifies a specific design, you must always verify compatibility with your exact vehicle make, model, and year.
Vehicle Applications and Fitment
Part number b0cp6vg2t is commonly listed for:
- 2014–2018 Honda Accord (except hybrid models)
- 2015–2020 Honda CR-V
- 2016–2021 Honda Civic (sedan and coupe)
- 2017–2022 Acura TLX
These vehicles share a similar front suspension architecture. However, trim levels (e.g., LX, EX, Sport, Touring) and drivetrain (FWD vs. AWD) may affect compatibility. For example, the CR-V with all-wheel drive may use a slightly different control arm due to different steering knuckle geometry. Always confirm using your VIN or an online fitment checker.
Note: Some online catalogs also list this part for Acura ILX and Honda HR-V, but these are less common. Always cross-reference with multiple sources.
Key Specifications and Features
To ensure you have the correct part, check these physical and technical characteristics:
- Construction: High-strength steel with a corrosion-resistant coating.
- Ball Joint: Pre-installed, greaseable, with a dust boot.
- Mounting Points: Two rubber bushings for the chassis side; one ball joint stud at the knuckle.
- Dimensions:
- Overall length: approximately 12.4 inches (315 mm)
- Bushing inner diameter: 12 mm
- Ball joint stud thread: 14 mm x 1.5 pitch
- Weight: Around 4.3 lbs (1.95 kg)
- OEM Cross-References: Honda part numbers 51350-TLA-A00, 51350-TLA-A10, 51350-TLA-A20 (check your specific submodel).
If the part you receive does not match these dimensions, do not install it. Return the item immediately.
How to Use This Part Number to Find the Right Replacement
When shopping for suspension part b0cp6vg2t, follow these steps to avoid buying the wrong part:
- Verify your vehicle’s year, make, and model. Do not rely solely on the part number. Use an online fitment tool (available on many parts websites) to input your vehicle details.
- Check your OEM part number. Look at the original control arm on your vehicle (if still installed) for a stamped or sticker part number. Cross-reference with b0cp6vg2t using an interchange guide.
- Compare physical dimensions. If possible, measure your old control arm’s length, bushing diameters, and ball joint taper. Compare these numbers to the specifications listed for b0cp6vg2t.
- Inspect included hardware. Some sellers include new bolts and nuts; others do not. If the part is sold without hardware, you may need to reuse your old fasteners or purchase new ones separately.
- Consider the brand reputation. Part number b0cp6vg2t is used by several aftermarket manufacturers. Stick with known brands that offer a warranty (e.g., MOOG, Dorman, AC Delco—though these may use different part numbers). Read the product description carefully for brand information.
Installation Considerations
Replacing a lower control arm is a moderately difficult job. If you are not experienced with suspension work, have a professional install it. Here are key points for DIY:
- Special tools required: You will need a ball joint separator (pickle fork or press), a torque wrench, and possibly a bushing press if the new arm does not come with bushings.
- Alignment is mandatory: After replacing a control arm, the vehicle’s front-end alignment must be checked and adjusted. Driving without alignment can cause tire wear and poor handling.
- Tighten fasteners at ride height: Always tighten control arm bolts when the suspension is under load (i.e., with the vehicle on the ground or on ramps) to avoid bushing preload and premature failure.
- Replace in pairs: It is strongly recommended to replace both front lower control arms at the same time (left and right) to ensure even wear and handling balance.
Final Recommendation
Suspension part number b0cp6vg2t is a reliable identifier for a front lower control arm on many Honda and Acura models from 2014 onward. To ensure a correct fit, always verify your vehicle’s VIN and cross-reference with OEM numbers. Pay attention to the part’s dimensions, construction material, and included hardware. If you are unsure, consult a suspension specialist or your local dealership.
For most users, purchasing a control arm from a reputable aftermarket brand that uses the b0cp6vg2t cross-reference will provide a cost-effective replacement that meets OEM specifications. Remember to replace both sides and get an alignment immediately after installation. With the right part and proper installation, your suspension will perform as designed.